The quality of nylon tie mold is very important. It directly determines the quality of products. The same is true for nylon tie molds. Let's take you to know the manufacturing process of nylon tie mold.

Nylon ribbon mold is an important method of making ribbon, and the production of mold also needs to rely on a certain medium, that is, mold kernel and mold embryo. The basic structure and shape of the mold is determined by the initial drawing design shape of the mold kernel and mold embryo. According to the national production specifications, each embryo

All tires need nylon tie molds

Engrave the mold number and template serial number on the opposite corner of the reference angle, which is equivalent to giving it a name. The national product reviewers can clearly consult the registration information of the template during the audit, so as to prevent illegal businesses from producing inferior products that are not in line with the market norms and protect nylon ties

Stability of belt mold market.

Usually, the quality of nylon tie mold determines the quality of the mold. At the beginning of the design, the mold must define the size of the product, design concept and design method through paper operation. Therefore, the mold manufacturer must check whether the design of the mold embryo meets the requirements in advance when actually building the mold

The description of the drawing, and the structure of the mold embryo cannot be modified at will. Once the mold product does not meet the specifications due to the problem of mold embryo, you can only complain that you have not done a good foundation in advance. Such behavior is to "lose your wife and lose your soldiers", which means you lose money

The cost of raw materials will delay the construction period due to the failure to respond to the mold problem to the manufacturer in time.

The mold kernels of all molds need to be covered with cooling water during molding, transportation and sales. Especially in places with deep and thick glue position, pay more attention to the size of water level. It can be adjusted according to the size of mold embryo, mainly divided into those with waterway diameter of 8.0mm and those with larger diameter

The can be 10mm, and the extra large can be 12mm, but the safety distance should be kept at least 4.0mm and more than 6.0mm from the glue position. Try to avoid that the local mold temperature is too high to affect the mold forming effect, and steps must be made at the copper blocking position of the water path, and the cooling water path of the mold core and the insert shall be sealed with a waterproof ring

From the mold.

For all movable parts of the die, such as row position, push block, push plate, etc., the mutual matching of slope sealing glue and slope shall be done, and oil grooves shall be opened at the parts of mutual friction to ensure the smoothness of operation. In order to ensure the high efficiency of demoulding, it is necessary to produce a large wrapping force on the front film and match it with

For the crochet of the back mold, the two forces are applied in the same direction and at the same time, which can make the whole demoulding process very smooth.

All molds should shorten the length of the flow channel on the premise of ensuring the quality. The so-called flow channel is the length of the mold embryo channel in which the sol can flow in and out. This purpose is to reduce the cross-sectional area as much as possible and speed up the passage time of the sol. Because of the light at the runner port of the nylon tie mold

The smoothness determines the fineness of the nylon tie, so its surface must be kept smooth, which not only ensures the smooth glue feeding and shortens the forming time, but also will not affect the production of the latter mold due to the residual adhesion of the residue to the wall.

The mold must also be equipped with an ejection system. This system is applied after the mold embryo is formed, which does not mean that the mold has been completed. If you think so, you are very wrong. Besides, not to mention how cumbersome the demoulding steps are, just pushing too hard will cause the whole die to die

The phenomenon of whitening due to excessive force.

The newly formed mold is like a newborn cub, which can't tolerate a touch of pressure. We should take care of it and treat it well in a reasonable way.